-is439(){
- [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* \
- || $ZSH_VERSION == <5->* ]] && return 0
- return 1
-}
-
-#f1# Checks whether or not you're running grml
-isgrml(){
- [[ -f /etc/grml_version ]] && return 0
- return 1
-}
-
-#f1# Checks whether or not you're running a grml cd
-isgrmlcd(){
- [[ -f /etc/grml_cd ]] && return 0
- return 1
-}
-
-if isgrml ; then
-#f1# Checks whether or not you're running grml-small
- isgrmlsmall() {
- if [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]]; then
- return 0
- fi
- return 1
- }
-else
- isgrmlsmall() { return 1 }
-fi
-
-isdarwin(){
- [[ $OSTYPE == darwin* ]] && return 0
- return 1
-}
-
-isfreebsd(){
- [[ $OSTYPE == freebsd* ]] && return 0
- return 1
-}
-
-#f1# are we running within an utf environment?
-isutfenv() {
- case "$LANG $CHARSET $LANGUAGE" in
- *utf*) return 0 ;;
- *UTF*) return 0 ;;
- *) return 1 ;;
- esac
-}
-
-# check for user, if not running as root set $SUDO to sudo
-(( EUID != 0 )) && SUDO='sudo' || SUDO=''
-
-# change directory to home on first invocation of zsh
-# important for rungetty -> autologin
-# Thanks go to Bart Schaefer!
-isgrml && checkhome() {
- if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
- export ALREADY_DID_CD_HOME=$HOME
- cd
- fi
-}
-
-# check for zsh v3.1.7+
-
-if ! [[ ${ZSH_VERSION} == 3.1.<7->* \
- || ${ZSH_VERSION} == 3.<2->.<->* \
- || ${ZSH_VERSION} == <4->.<->* ]] ; then
-
- printf '-!-\n'
- printf '-!- In this configuration we try to make use of features, that only\n'
- printf '-!- require version 3.1.7 of the shell; That way this setup can be\n'
- printf '-!- used with a wide range of zsh versions, while using fairly\n'
- printf '-!- advanced features in all supported versions.\n'
- printf '-!-\n'
- printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION"
- printf '-!-\n'
- printf '-!- While this *may* work, it might as well fail.\n'
- printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n'
- printf '-!-\n'
- printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n'
- printf '-!- If it does today, you'\''ve been lucky.\n'
- printf '-!-\n'
- printf '-!- Ye been warned!\n'
- printf '-!-\n'
-
- function zstyle() { : }
-fi
-
-# autoload wrapper - use this one instead of autoload directly
-# We need to define this function as early as this, because autoloading
-# 'is-at-least()' needs it.
-function zrcautoload() {
- emulate -L zsh
- setopt extended_glob
- local fdir ffile
- local -i ffound
-
- ffile=$1
- (( ffound = 0 ))
- for fdir in ${fpath} ; do
- [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 ))
- done
-
- (( ffound == 0 )) && return 1
- if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then
- autoload -U ${ffile} || return 1
- else
- autoload ${ffile} || return 1
- fi
- return 0
-}
-
-# Load is-at-least() for more precise version checks Note that this test will
-# *always* fail, if the is-at-least function could not be marked for
-# autoloading.
-zrcautoload is-at-least || is-at-least() { return 1 }
-
-# set some important options (as early as possible)
-
-# append history list to the history file; this is the default but we make sure
-# because it's required for share_history.
-setopt append_history
-
-# import new commands from the history file also in other zsh-session
-is4 && setopt share_history
-
-# save each command's beginning timestamp and the duration to the history file
-setopt extended_history
-
-# If a new command line being added to the history list duplicates an older
-# one, the older command is removed from the list
-is4 && setopt histignorealldups
-
-# remove command lines from the history list when the first character on the
-# line is a space
-setopt histignorespace
-
-# if a command is issued that can't be executed as a normal command, and the
-# command is the name of a directory, perform the cd command to that directory.
-setopt auto_cd
-
-# in order to use #, ~ and ^ for filename generation grep word
-# *~(*.gz|*.bz|*.bz2|*.zip|*.Z) -> searches for word not in compressed files
-# don't forget to quote '^', '~' and '#'!
-setopt extended_glob
-
-# display PID when suspending processes as well
-setopt longlistjobs
-
-# try to avoid the 'zsh: no matches found...'
-setopt nonomatch
-
-# report the status of backgrounds jobs immediately
-setopt notify
-
-# whenever a command completion is attempted, make sure the entire command path
-# is hashed first.
-setopt hash_list_all
-
-# not just at the end
-setopt completeinword
-
-# Don't send SIGHUP to background processes when the shell exits.
-setopt nohup
-
-# make cd push the old directory onto the directory stack.
-setopt auto_pushd
-
-# avoid "beep"ing
-setopt nobeep
-
-# don't push the same dir twice.
-setopt pushd_ignore_dups
-
-# * shouldn't match dotfiles. ever.
-setopt noglobdots
-
-# use zsh style word splitting
-setopt noshwordsplit
-
-# don't error out when unset parameters are used
-setopt unset
-
-# setting some default values
-NOCOR=${NOCOR:-0}
-NOMENU=${NOMENU:-0}
-NOPRECMD=${NOPRECMD:-0}
-COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0}
-GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found}
-BATTERY=${BATTERY:-0}
-GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
-ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0}
-
-typeset -ga ls_options
-typeset -ga grep_options
-if ls --help 2> /dev/null | grep -q GNU; then
- ls_options=( --color=auto )
-elif [[ $OSTYPE == freebsd* ]]; then
- ls_options=( -G )
-fi
-if grep --help 2> /dev/null | grep -q GNU || \
- [[ $OSTYPE == freebsd* ]]; then
- grep_options=( --color=auto )
-fi
-
-# utility functions
-# this function checks if a command exists and returns either true
-# or false. This avoids using 'which' and 'whence', which will
-# avoid problems with aliases for which on certain weird systems. :-)
-# Usage: check_com [-c|-g] word
-# -c only checks for external commands
-# -g does the usual tests and also checks for global aliases
-check_com() {
- emulate -L zsh
- local -i comonly gatoo
-
- if [[ $1 == '-c' ]] ; then
- (( comonly = 1 ))
- shift
- elif [[ $1 == '-g' ]] ; then
- (( gatoo = 1 ))
- else
- (( comonly = 0 ))
- (( gatoo = 0 ))
- fi
-
- if (( ${#argv} != 1 )) ; then
- printf 'usage: check_com [-c] <command>\n' >&2
- return 1
- fi
-
- if (( comonly > 0 )) ; then
- [[ -n ${commands[$1]} ]] && return 0
- return 1
- fi
-
- if [[ -n ${commands[$1]} ]] \
- || [[ -n ${functions[$1]} ]] \
- || [[ -n ${aliases[$1]} ]] \
- || [[ -n ${reswords[(r)$1]} ]] ; then
-
- return 0
- fi
-
- if (( gatoo > 0 )) && [[ -n ${galiases[$1]} ]] ; then
- return 0
- fi
-
- return 1
-}
-
-# creates an alias and precedes the command with
-# sudo if $EUID is not zero.
-salias() {
- emulate -L zsh
- local only=0 ; local multi=0
- local key val
- while [[ $1 == -* ]] ; do
- case $1 in
- (-o) only=1 ;;
- (-a) multi=1 ;;
- (--) shift ; break ;;
- (-h)
- printf 'usage: salias [-h|-o|-a] <alias-expression>\n'
- printf ' -h shows this help text.\n'
- printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n'
- printf ' be careful using this option.\n'
- printf ' -o only sets an alias if a preceding sudo would be needed.\n'
- return 0
- ;;
- (*) printf "unkown option: '%s'\n" "$1" ; return 1 ;;
- esac
- shift
- done
-
- if (( ${#argv} > 1 )) ; then
- printf 'Too many arguments %s\n' "${#argv}"
- return 1
- fi
-
- key="${1%%\=*}" ; val="${1#*\=}"
- if (( EUID == 0 )) && (( only == 0 )); then
- alias -- "${key}=${val}"
- elif (( EUID > 0 )) ; then
- (( multi > 0 )) && val="${val// ; / ; sudo }"
- alias -- "${key}=sudo ${val}"
- fi
-
- return 0
-}
-
-# a "print -l ${(u)foo}"-workaround for pre-4.2.0 shells
-# usage: uprint foo
-# Where foo is the *name* of the parameter you want printed.
-# Note that foo is no typo; $foo would be wrong here!
-if ! is42 ; then
- uprint () {
- emulate -L zsh
- local -a u
- local w
- local parameter=$1
-
- if [[ -z ${parameter} ]] ; then
- printf 'usage: uprint <parameter>\n'
- return 1
- fi
-
- for w in ${(P)parameter} ; do
- [[ -z ${(M)u:#$w} ]] && u=( $u $w )
- done
-
- builtin print -l $u
- }
-fi
-
-# Check if we can read given files and source those we can.
-xsource() {
- if (( ${#argv} < 1 )) ; then
- printf 'usage: xsource FILE(s)...\n' >&2
- return 1
- fi
-
- while (( ${#argv} > 0 )) ; do
- [[ -r "$1" ]] && source "$1"
- shift
- done
- return 0
-}
-
-# Check if we can read a given file and 'cat(1)' it.
-xcat() {
- emulate -L zsh
- if (( ${#argv} != 1 )) ; then
- printf 'usage: xcat FILE\n' >&2
- return 1
- fi
-
- [[ -r $1 ]] && cat $1
- return 0
-}
-
-# Remove these functions again, they are of use only in these
-# setup files. This should be called at the end of .zshrc.
-xunfunction() {
- emulate -L zsh
- local -a funcs
- funcs=(salias xcat xsource xunfunction zrcautoload zrcautozle)
- for func in $funcs ; do
- [[ -n ${functions[$func]} ]] \
- && unfunction $func
- done
- return 0
-}
-
-# this allows us to stay in sync with grml's zshrc and put own
-# modifications in ~/.zshrc.local
-zrclocal() {
- xsource "/etc/zsh/zshrc.local"
- xsource "${ZDOTDIR:-${HOME}}/.zshrc.local"
- return 0
-}
-
-# locale setup
-if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then
- xsource "/etc/default/locale"
-fi
-
-for var in LANG LC_ALL LC_MESSAGES ; do
- [[ -n ${(P)var} ]] && export $var
-done
-
-xsource "/etc/sysconfig/keyboard"
-
-TZ=$(xcat /etc/timezone)
-
-# set some variables
-if check_com -c vim ; then
-#v#
- export EDITOR=${EDITOR:-vim}
-else
- export EDITOR=${EDITOR:-vi}
-fi
-
-#v#
-export PAGER=${PAGER:-less}
-
-#v#
-export MAIL=${MAIL:-/var/mail/$USER}
-
-# if we don't set $SHELL then aterm, rxvt,.. will use /bin/sh or /bin/bash :-/
-export SHELL='/bin/zsh'
-
-# color setup for ls:
-check_com -c dircolors && eval $(dircolors -b)
-# color setup for ls on OS X / FreeBSD:
-isdarwin && export CLICOLOR=1
-isfreebsd && export CLICOLOR=1
-
-# do MacPorts setup on darwin
-if isdarwin && [[ -d /opt/local ]]; then
- # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into
- # zshenv.
- PATH="/opt/local/bin:/opt/local/sbin:$PATH"
- MANPATH="/opt/local/share/man:$MANPATH"
-fi
-# do Fink setup on darwin
-isdarwin && xsource /sw/bin/init.sh
-
-# load our function and completion directories
-for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do
- fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} )
- if [[ ${fdir} == '/usr/share/grml/zsh/functions' ]] ; then
- for func in ${fdir}/**/[^_]*[^~](N.) ; do
- zrcautoload ${func:t}
- done
- fi
-done
-unset fdir func
-
-# support colors in less
-export LESS_TERMCAP_mb=$'\E[01;31m'
-export LESS_TERMCAP_md=$'\E[01;31m'
-export LESS_TERMCAP_me=$'\E[0m'
-export LESS_TERMCAP_se=$'\E[0m'
-export LESS_TERMCAP_so=$'\E[01;44;33m'
-export LESS_TERMCAP_ue=$'\E[0m'
-export LESS_TERMCAP_us=$'\E[01;32m'
-
-# mailchecks
-MAILCHECK=30
-
-# report about cpu-/system-/user-time of command if running longer than
-# 5 seconds
-REPORTTIME=5
-
-# watch for everyone but me and root
-watch=(notme root)
-
-# automatically remove duplicates from these arrays
-typeset -U path cdpath fpath manpath
-
-# Load a few modules
-is4 && \
-for mod in parameter complist deltochar mathfunc ; do
- zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :("
-done
-
-# autoload zsh modules when they are referenced
-if is4 ; then
- zmodload -a zsh/stat zstat
- zmodload -a zsh/zpty zpty
- zmodload -ap zsh/mapfile mapfile
-fi
-
-# completion system
-if zrcautoload compinit ; then
- compinit || print 'Notice: no compinit available :('
-else
- print 'Notice: no compinit available :('
- function compdef { }
-fi
-
-# completion system
-
-# called later (via is4 && grmlcomp)
-# note: use 'zstyle' for getting current settings
-# press ^xh (control-x h) for getting tags in context; ^x? (control-x ?) to run complete_debug with trace output
-grmlcomp() {
- # TODO: This could use some additional information
-
- # Make sure the completion system is initialised
- (( ${+_comps} )) || return 1
-
- # allow one error for every three characters typed in approximate completer
- zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )'
-
- # don't complete backup files as executables
- zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)'
-
- # start menu completion only if it could find no unambiguous initial string
- zstyle ':completion:*:correct:*' insert-unambiguous true
- zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}'
- zstyle ':completion:*:correct:*' original true
-
- # activate color-completion
- zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
-
- # format on completion
- zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}'
-
- # automatically complete 'cd -<tab>' and 'cd -<ctrl-d>' with menu
- # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select
-
- # insert all expansions for expand completer
- zstyle ':completion:*:expand:*' tag-order all-expansions
- zstyle ':completion:*:history-words' list false
-
- # activate menu
- zstyle ':completion:*:history-words' menu yes
-
- # ignore duplicate entries
- zstyle ':completion:*:history-words' remove-all-dups yes
- zstyle ':completion:*:history-words' stop yes
-
- # match uppercase from lowercase
- zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
-
- # separate matches into groups
- zstyle ':completion:*:matches' group 'yes'
- zstyle ':completion:*' group-name ''
-
- if [[ "$NOMENU" -eq 0 ]] ; then
- # if there are more than 5 options allow selecting from a menu
- zstyle ':completion:*' menu select=5
- else
- # don't use any menus at all
- setopt no_auto_menu
- fi
-
- zstyle ':completion:*:messages' format '%d'
- zstyle ':completion:*:options' auto-description '%d'
-
- # describe options in full
- zstyle ':completion:*:options' description 'yes'
-
- # on processes completion complete all user processes
- zstyle ':completion:*:processes' command 'ps -au$USER'
-
- # offer indexes before parameters in subscripts
- zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters
-
- # provide verbose completion information
- zstyle ':completion:*' verbose true
-
- # recent (as of Dec 2007) zsh versions are able to provide descriptions
- # for commands (read: 1st word in the line) that it will list for the user
- # to choose from. The following disables that, because it's not exactly fast.
- zstyle ':completion:*:-command-:*:' verbose false
-
- # set format for warnings
- zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d'
-
- # define files to ignore for zcompile
- zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)'
- zstyle ':completion:correct:' prompt 'correct to: %e'
-
- # Ignore completion functions for commands you don't have:
- zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*'
-
- # Provide more processes in completion of programs like killall:
- zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq'
-
- # complete manual by their section
- zstyle ':completion:*:manuals' separate-sections true
- zstyle ':completion:*:manuals.*' insert-sections true
- zstyle ':completion:*:man:*' menu yes select
-
- # Search path for sudo completion
- zstyle ':completion:*:sudo:*' command-path /usr/local/sbin \
- /usr/local/bin \
- /usr/sbin \
- /usr/bin \
- /sbin \
- /bin \
- /usr/X11R6/bin
-
- # provide .. as a completion
- zstyle ':completion:*' special-dirs ..
-
- # run rehash on completion so new installed program are found automatically:
- _force_rehash() {
- (( CURRENT == 1 )) && rehash
- return 1
- }
-
- ## correction
- # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it
- if [[ "$NOCOR" -gt 0 ]] ; then
- zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored
- setopt nocorrect
- else
- # try to be smart about when to use what completer...
- setopt correct
- zstyle -e ':completion:*' completer '
- if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then
- _last_try="$HISTNO$BUFFER$CURSOR"
- reply=(_complete _match _ignored _prefix _files)
- else
- if [[ $words[1] == (rm|mv) ]] ; then
- reply=(_complete _files)
- else
- reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files)
- fi
- fi'
- fi
-
- # command for process lists, the local web server details and host completion
- zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
-
- # caching
- [[ -d $ZSHDIR/cache ]] && zstyle ':completion:*' use-cache yes && \
- zstyle ':completion::complete:*' cache-path $ZSHDIR/cache/
-
- # host completion
- if is42 ; then
- [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
- [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
- else
- _ssh_hosts=()
- _etc_hosts=()
- fi
- hosts=(
- $(hostname)
- "$_ssh_hosts[@]"
- "$_etc_hosts[@]"
- localhost
- )
- zstyle ':completion:*:hosts' hosts $hosts
- # TODO: so, why is this here?
- # zstyle '*' hosts $hosts
-
- # use generic completion system for programs not yet defined; (_gnu_generic works
- # with commands that provide a --help option with "standard" gnu-like output.)
- for compcom in cp deborphan df feh fetchipac head hnb ipacsum mv \
- pal stow tail uname ; do
- [[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom}
- done; unset compcom
-
- # see upgrade function in this file
- compdef _hosts upgrade
-}
-
-# Keyboard setup: The following is based on the same code, we wrote for
-# debian's setup. It ensures the terminal is in the right mode, when zle is
-# active, so the values from $terminfo are valid. Therefore, this setup should
-# work on all systems, that have support for `terminfo'. It also requires the
-# zsh in use to have the `zsh/terminfo' module built.
-#
-# If you are customising your `zle-line-init()' or `zle-line-finish()'
-# functions, make sure you call the following utility functions in there:
-#
-# - zle-line-init(): zle-smkx
-# - zle-line-finish(): zle-rmkx
-
-# Use emacs-like key bindings by default:
-bindkey -e
-
-# Custom widgets:
-
-## beginning-of-line OR beginning-of-buffer OR beginning of history
-## by: Bart Schaefer <schaefer@brasslantern.com>, Bernhard Tittelbach
-beginning-or-end-of-somewhere() {
- local hno=$HISTNO
- if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \
- ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then
- zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
- else
- zle .${WIDGET:s/somewhere/line-hist/} "$@"
- if (( HISTNO != hno )); then
- zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
- fi
- fi
-}
-zle -N beginning-of-somewhere beginning-or-end-of-somewhere
-zle -N end-of-somewhere beginning-or-end-of-somewhere
-
-## toggle the ,. abbreviation feature on/off
-# NOABBREVIATION: default abbreviation-state
-# 0 - enabled (default)
-# 1 - disabled
-NOABBREVIATION=${NOABBREVIATION:-0}
-
-grml_toggle_abbrev() {
- if (( ${NOABBREVIATION} > 0 )) ; then
- NOABBREVIATION=0
- else
- NOABBREVIATION=1
- fi
-}
-zle -N grml_toggle_abbrev
-
-# add a command line to the shells history without executing it
-commit-to-history() {
- print -s ${(z)BUFFER}
- zle send-break
-}
-zle -N commit-to-history
-
-# only slash should be considered as a word separator:
-slash-backward-kill-word() {
- local WORDCHARS="${WORDCHARS:s@/@}"
- # zle backward-word
- zle backward-kill-word
-}
-zle -N slash-backward-kill-word
-
-# a generic accept-line wrapper
-
-# This widget can prevent unwanted autocorrections from command-name
-# to _command-name, rehash automatically on enter and call any number
-# of builtin and user-defined widgets in different contexts.
-#
-# For a broader description, see:
-# <http://bewatermyfriend.org/posts/2007/12-26.11-50-38-tooltime.html>
-#
-# The code is imported from the file 'zsh/functions/accept-line' from
-# <http://ft.bewatermyfriend.org/comp/zsh/zsh-dotfiles.tar.bz2>, which
-# distributed under the same terms as zsh itself.
-
-# A newly added command will may not be found or will cause false
-# correction attempts, if you got auto-correction set. By setting the
-# following style, we force accept-line() to rehash, if it cannot
-# find the first word on the command line in the $command[] hash.
-zstyle ':acceptline:*' rehash true
-
-function Accept-Line() {
- setopt localoptions noksharrays
- local -a subs
- local -xi aldone
- local sub
- local alcontext=${1:-$alcontext}
-
- zstyle -a ":acceptline:${alcontext}" actions subs
-
- (( ${#subs} < 1 )) && return 0
-
- (( aldone = 0 ))
- for sub in ${subs} ; do
- [[ ${sub} == 'accept-line' ]] && sub='.accept-line'
- zle ${sub}
-
- (( aldone > 0 )) && break
- done
-}
-
-function Accept-Line-getdefault() {
- emulate -L zsh
- local default_action
-
- zstyle -s ":acceptline:${alcontext}" default_action default_action
- case ${default_action} in
- ((accept-line|))
- printf ".accept-line"
- ;;
- (*)
- printf ${default_action}
- ;;
- esac
-}
-
-function Accept-Line-HandleContext() {
- zle Accept-Line
-
- default_action=$(Accept-Line-getdefault)
- zstyle -T ":acceptline:${alcontext}" call_default \
- && zle ${default_action}
-}
-
-function accept-line() {
- setopt localoptions noksharrays
- local -ax cmdline
- local -x alcontext
- local buf com fname format msg default_action
-
- alcontext='default'
- buf="${BUFFER}"
- cmdline=(${(z)BUFFER})
- com="${cmdline[1]}"
- fname="_${com}"
-
- Accept-Line 'preprocess'
-
- zstyle -t ":acceptline:${alcontext}" rehash \
- && [[ -z ${commands[$com]} ]] \
- && rehash
-
- if [[ -n ${com} ]] \
- && [[ -n ${reswords[(r)$com]} ]] \
- || [[ -n ${aliases[$com]} ]] \
- || [[ -n ${functions[$com]} ]] \
- || [[ -n ${builtins[$com]} ]] \
- || [[ -n ${commands[$com]} ]] ; then
-
- # there is something sensible to execute, just do it.
- alcontext='normal'
- Accept-Line-HandleContext
-
- return
- fi
-
- if [[ -o correct ]] \
- || [[ -o correctall ]] \
- && [[ -n ${functions[$fname]} ]] ; then
-
- # nothing there to execute but there is a function called
- # _command_name; a completion widget. Makes no sense to
- # call it on the commandline, but the correct{,all} options
- # will ask for it nevertheless, so warn the user.
- if [[ ${LASTWIDGET} == 'accept-line' ]] ; then
- # Okay, we warned the user before, he called us again,
- # so have it his way.
- alcontext='force'
- Accept-Line-HandleContext
-
- return
- fi
-
- if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then
- alcontext='normal'
- Accept-Line-HandleContext
- else
- # prepare warning message for the user, configurable via zstyle.
- zstyle -s ":acceptline:${alcontext}" compwarnfmt msg
-
- if [[ -z ${msg} ]] ; then
- msg="%c will not execute and completion %f exists."
- fi
-
- zformat -f msg "${msg}" "c:${com}" "f:${fname}"
-
- zle -M -- "${msg}"
- fi
- return
- elif [[ -n ${buf//[$' \t\n']##/} ]] ; then
- # If we are here, the commandline contains something that is not
- # executable, which is neither subject to _command_name correction
- # and is not empty. might be a variable assignment
- alcontext='misc'
- Accept-Line-HandleContext
-
- return
- fi
-
- # If we got this far, the commandline only contains whitespace, or is empty.
- alcontext='empty'
- Accept-Line-HandleContext
-}
-
-zle -N accept-line
-zle -N Accept-Line
-zle -N Accept-Line-HandleContext
-
-# power completion - abbreviation expansion
-# power completion / abbreviation expansion / buffer expansion
-# see http://zshwiki.org/home/examples/zleiab for details
-# less risky than the global aliases but powerful as well
-# just type the abbreviation key and afterwards ',.' to expand it
-declare -A abk
-setopt extendedglob
-setopt interactivecomments
-abk=(
-# key # value (#d additional doc string)
-#A# start
- '...' '../..'
- '....' '../../..'
- 'BG' '& exit'
- 'C' '| wc -l'
- 'G' '|& grep '${grep_options:+"${grep_options[*]}"}
- 'H' '| head'
- 'Hl' ' --help |& less -r' #d (Display help in pager)
- 'L' '| less'
- 'LL' '|& less -r'
- 'M' '| most'
- 'N' '&>/dev/null' #d (No Output)
- 'R' '| tr A-z N-za-m' #d (ROT13)
- 'SL' '| sort | less'
- 'S' '| sort -u'
- 'T' '| tail'
- 'V' '|& vim -'
-#A# end
- 'co' './configure && make && sudo make install'
-)
-
-zleiab() {
- emulate -L zsh
- setopt extendedglob
- local MATCH
-
- if (( NOABBREVIATION > 0 )) ; then
- LBUFFER="${LBUFFER},."
- return 0
- fi
-
- LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#}
- LBUFFER+=${abk[$MATCH]:-$MATCH}
-}
-
-zle -N zleiab
-
-help-show-abk()
-{
- zle -M "$(print "Type ,. after these abbreviations to expand them:"; print -a -C 2 ${(kv)abk})"
-}
-
-zle -N help-show-abk
-
-# press "ctrl-e d" to insert the actual date in the form yyyy-mm-dd
-insert-datestamp() { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; }
-zle -N insert-datestamp
-
-# press esc-m for inserting last typed word again (thanks to caphuso!)
-insert-last-typed-word() { zle insert-last-word -- 0 -1 };
-zle -N insert-last-typed-word;
-
-function grml-zsh-fg() {
- if (( ${#jobstates} )); then
- zle .push-input
- [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER=''
- BUFFER="${BUFFER}fg"
- zle .accept-line
- else
- zle -M 'No background jobs. Doing nothing.'
- fi
-}
-zle -N grml-zsh-fg
-
-# run command line as user root via sudo:
-sudo-command-line() {
- [[ -z $BUFFER ]] && zle up-history
- if [[ $BUFFER != sudo\ * ]]; then
- BUFFER="sudo $BUFFER"
- CURSOR=$(( CURSOR+5 ))
- fi
-}
-zle -N sudo-command-line
-
-### jump behind the first word on the cmdline.
-### useful to add options.
-function jump_after_first_word() {
- local words
- words=(${(z)BUFFER})
-
- if (( ${#words} <= 1 )) ; then
- CURSOR=${#BUFFER}
- else
- CURSOR=${#${words[1]}}
- fi
-}
-zle -N jump_after_first_word
-
-#f5# Create directory under cursor or the selected area
-inplaceMkDirs() {
- # Press ctrl-xM to create the directory under the cursor or the selected area.
- # To select an area press ctrl-@ or ctrl-space and use the cursor.
- # Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
- # directory does not exist yet -> press ctrl-XM and problem solved
- local PATHTOMKDIR
- if ((REGION_ACTIVE==1)); then
- local F=$MARK T=$CURSOR
- if [[ $F -gt $T ]]; then
- F=${CURSOR}
- T=${MARK}
- fi
- # get marked area from buffer and eliminate whitespace
- PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##}
- PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##}
- else
- local bufwords iword
- bufwords=(${(z)LBUFFER})
- iword=${#bufwords}
- bufwords=(${(z)BUFFER})
- PATHTOMKDIR="${(Q)bufwords[iword]}"
- fi
- [[ -z "${PATHTOMKDIR}" ]] && return 1
- PATHTOMKDIR=${~PATHTOMKDIR}
- if [[ -e "${PATHTOMKDIR}" ]]; then
- zle -M " path already exists, doing nothing"
- else
- zle -M "$(mkdir -p -v "${PATHTOMKDIR}")"
- zle end-of-line
- fi
-}
-
-#k# mkdir -p <dir> from string under cursor or marked area
-zle -N inplaceMkDirs
-
-#v1# set number of lines to display per page
-HELP_LINES_PER_PAGE=20
-#v1# set location of help-zle cache file
-HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh
-# helper function for help-zle, actually generates the help text
-help_zle_parse_keybindings()
-{
- emulate -L zsh
- setopt extendedglob
- unsetopt ksharrays #indexing starts at 1
-
- #v1# choose files that help-zle will parse for keybindings
- ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local )
-
- if [[ -r $HELP_ZLE_CACHE_FILE ]]; then
- local load_cache=0
- for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1
- [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return
- fi
-
- #fill with default keybindings, possibly to be overwriten in a file later
- #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later
- local -A help_zle_keybindings
- help_zle_keybindings['<Ctrl>@']="set MARK"
- help_zle_keybindings['<Ctrl>x<Ctrl>j']="vi-join lines"
- help_zle_keybindings['<Ctrl>x<Ctrl>b']="jump to matching brace"
- help_zle_keybindings['<Ctrl>x<Ctrl>u']="undo"
- help_zle_keybindings['<Ctrl>_']="undo"
- help_zle_keybindings['<Ctrl>x<Ctrl>f<c>']="find <c> in cmdline"
- help_zle_keybindings['<Ctrl>a']="goto beginning of line"
- help_zle_keybindings['<Ctrl>e']="goto end of line"
- help_zle_keybindings['<Ctrl>t']="transpose charaters"
- help_zle_keybindings['<Alt>t']="transpose words"
- help_zle_keybindings['<Alt>s']="spellcheck word"
- help_zle_keybindings['<Ctrl>k']="backward kill buffer"
- help_zle_keybindings['<Ctrl>u']="forward kill buffer"
- help_zle_keybindings['<Ctrl>y']="insert previously killed word/string"
- help_zle_keybindings["<Alt>'"]="quote line"
- help_zle_keybindings['<Alt>"']="quote from mark to cursor"
- help_zle_keybindings['<Alt><arg>']="repeat next cmd/char <arg> times (<Alt>-<Alt>1<Alt>0a -> -10 times 'a')"
- help_zle_keybindings['<Alt>u']="make next word Uppercase"
- help_zle_keybindings['<Alt>l']="make next word lowercase"
- help_zle_keybindings['<Ctrl>xd']="preview expansion under cursor"
- help_zle_keybindings['<Alt>q']="push current CL into background, freeing it. Restore on next CL"
- help_zle_keybindings['<Alt>.']="insert (and interate through) last word from prev CLs"
- help_zle_keybindings['<Alt>,']="complete word from newer history (consecutive hits)"
- help_zle_keybindings['<Alt>m']="repeat last typed word on current CL"
- help_zle_keybindings['<Ctrl>v']="insert next keypress symbol literally (e.g. for bindkey)"
- help_zle_keybindings['!!:n*<Tab>']="insert last n arguments of last command"
- help_zle_keybindings['!!:n-<Tab>']="insert arguments n..N-2 of last command (e.g. mv s s d)"
- help_zle_keybindings['<Alt>h']="show help/manpage for current command"
-
- #init global variables
- unset help_zle_lines help_zle_sln
- typeset -g -a help_zle_lines
- typeset -g help_zle_sln=1
-
- local k v
- local lastkeybind_desc contents #last description starting with #k# that we found
- local num_lines_elapsed=0 #number of lines between last description and keybinding
- #search config files in the order they a called (and thus the order in which they overwrite keybindings)
- for f in $HELPZLE_KEYBINDING_FILES; do
- [[ -r "$f" ]] || continue #not readable ? skip it
- contents="$(<$f)"
- for cline in "${(f)contents}"; do
- #zsh pattern: matches lines like: #k# ..............
- if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then
- lastkeybind_desc="$match[*]"
- num_lines_elapsed=0
- #zsh pattern: matches lines that set a keybinding using bind2map, bindkey or compdef -k
- # ignores lines that are commentend out
- # grabs first in '' or "" enclosed string with length between 1 and 6 characters
- elif [[ "$cline" == [^#]#(bind2maps[[:space:]](*)-s|bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
- #description prevously found ? description not more than 2 lines away ? keybinding not empty ?
- if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then
- #substitute keybinding string with something readable
- k=${${${${${${${match[1]/\\e\^h/<Alt><BS>}/\\e\^\?/<Alt><BS>}/\\e\[5~/<PageUp>}/\\e\[6~/<PageDown>}//(\\e|\^\[)/<Alt>}//\^/<Ctrl>}/3~/<Alt><Del>}
- #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files
- #Note that we are extracting the keybinding-string including the quotes (see Note at beginning)
- help_zle_keybindings[${k}]=$lastkeybind_desc
- fi
- lastkeybind_desc=""
- else
- ((num_lines_elapsed++))
- fi
- done
- done
- unset contents
- #calculate length of keybinding column
- local kstrlen=0
- for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k}
- #convert the assoc array into preformated lines, which we are able to sort
- for k v in ${(kv)help_zle_keybindings[@]}; do
- #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes)
- help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}")
- done
- #sort lines alphabetically
- help_zle_lines=("${(i)help_zle_lines[@]}")
- [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}"
- echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE
- zcompile $HELP_ZLE_CACHE_FILE
-}
-typeset -g help_zle_sln
-typeset -g -a help_zle_lines
-
-# Provides (partially autogenerated) help on keybindings and the zsh line editor
-help-zle()
-{
- emulate -L zsh
- unsetopt ksharrays #indexing starts at 1
- #help lines already generated ? no ? then do it
- [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings}
- #already displayed all lines ? go back to the start
- [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1
- local sln=$help_zle_sln
- #note that help_zle_sln is a global var, meaning we remember the last page we viewed
- help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE))
- zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}"
-}
-zle -N help-zle
-
-## complete word from currently visible Screen or Tmux buffer.
-if check_com -c screen || check_com -c tmux; then
- _complete_screen_display() {
- [[ "$TERM" != "screen" ]] && return 1
-
- local TMPFILE=$(mktemp)
- local -U -a _screen_display_wordlist
- trap "rm -f $TMPFILE" EXIT
-
- # fill array with contents from screen hardcopy
- if ((${+TMUX})); then
- #works, but crashes tmux below version 1.4
- #luckily tmux -V option to ask for version, was also added in 1.4
- tmux -V &>/dev/null || return
- tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0
- else
- screen -X hardcopy $TMPFILE
- # screen sucks, it dumps in latin1, apparently always. so recode it
- # to system charset
- check_com recode && recode latin1 $TMPFILE
- fi
- _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} )
- # remove PREFIX to be completed from that array
- _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]=""
- compadd -a _screen_display_wordlist
- }
- #m# k CTRL-x\,\,\,S Complete word from GNU screen buffer
- bindkey -r "^xS"
- compdef -k _complete_screen_display complete-word '^xS'
-fi
-
-# Load a few more functions and tie them to widgets, so they can be bound:
-
-function zrcautozle() {
- emulate -L zsh
- local fnc=$1
- zrcautoload $fnc && zle -N $fnc
-}
-
-function zrcgotwidget() {
- (( ${+widgets[$1]} ))
-}
-
-function zrcgotkeymap() {
- [[ -n ${(M)keymaps:#$1} ]]
-}
-
-zrcautozle insert-files
-zrcautozle edit-command-line
-zrcautozle insert-unicode-char
-if zrcautoload history-search-end; then
- zle -N history-beginning-search-backward-end history-search-end
- zle -N history-beginning-search-forward-end history-search-end
-fi
-zle -C hist-complete complete-word _generic
-zstyle ':completion:hist-complete:*' completer _history
-
-# The actual terminal setup hooks and bindkey-calls:
-
-# An array to note missing features to ease diagnosis in case of problems.
-typeset -ga grml_missing_features
-
-function zrcbindkey() {
- if (( ARGC )) && zrcgotwidget ${argv[-1]}; then
- bindkey "$@"
- fi
-}
-
-function bind2maps () {
- local i sequence widget
- local -a maps
-
- while [[ "$1" != "--" ]]; do
- maps+=( "$1" )
- shift
- done
- shift
-
- if [[ "$1" == "-s" ]]; then
- shift
- sequence="$1"
- else
- sequence="${key[$1]}"
- fi
- widget="$2"
-
- [[ -z "$sequence" ]] && return 1
-
- for i in "${maps[@]}"; do
- zrcbindkey -M "$i" "$sequence" "$widget"
- done
-}
-
-if (( ${+terminfo[smkx]} )) && (( ${+terminfo[rmkx]} )); then
- function zle-smkx () {
- emulate -L zsh
- printf '%s' ${terminfo[smkx]}
- }
- function zle-rmkx () {
- emulate -L zsh
- printf '%s' ${terminfo[rmkx]}
- }
- function zle-line-init () {
- zle-smkx
- }
- function zle-line-finish () {
- zle-rmkx
- }
- zle -N zle-line-init
- zle -N zle-line-finish
-else
- for i in {s,r}mkx; do
- (( ${+terminfo[$i]} )) || grml_missing_features+=($i)
- done
- unset i
-fi
-
-typeset -A key
-key=(
- Home "${terminfo[khome]}"
- End "${terminfo[kend]}"
- Insert "${terminfo[kich1]}"
- Delete "${terminfo[kdch1]}"
- Up "${terminfo[kcuu1]}"
- Down "${terminfo[kcud1]}"
- Left "${terminfo[kcub1]}"
- Right "${terminfo[kcuf1]}"
- PageUp "${terminfo[kpp]}"
- PageDown "${terminfo[knp]}"
- BackTab "${terminfo[kcbt]}"
-)
-
-# Guidelines for adding key bindings:
-#
-# - Do not add hardcoded escape sequences, to enable non standard key
-# combinations such as Ctrl-Meta-Left-Cursor. They are not easily portable.
-#
-# - Adding Ctrl characters, such as '^b' is okay; note that '^b' and '^B' are
-# the same key.
-#
-# - All keys from the $key[] mapping are obviously okay.
-#
-# - Most terminals send "ESC x" when Meta-x is pressed. Thus, sequences like
-# '\ex' are allowed in here as well.
-
-bind2maps emacs -- Home beginning-of-somewhere
-bind2maps viins vicmd -- Home vi-beginning-of-line
-bind2maps emacs -- End end-of-somewhere
-bind2maps viins vicmd -- End vi-end-of-line
-bind2maps emacs viins -- Insert overwrite-mode
-bind2maps vicmd -- Insert vi-insert
-bind2maps emacs -- Delete delete-char
-bind2maps viins vicmd -- Delete vi-delete-char
-bind2maps emacs viins vicmd -- Up up-line-or-search
-bind2maps emacs viins vicmd -- Down down-line-or-search
-bind2maps emacs -- Left backward-char
-bind2maps viins vicmd -- Left vi-backward-char
-bind2maps emacs -- Right forward-char
-bind2maps viins vicmd -- Right vi-forward-char
-bind2maps viins vicmd -- Right vi-forward-char
-#k# Display list of abbreviations that expand when followed by ,.
-bind2maps emacs viins -- -s ',.' zleiab
-bind2maps emacs viins -- -s '^xb' help-show-abk
-bind2maps emacs viins -- -s '^xM' inplaceMkDirs
-#k# display help for keybindings and ZLE
-bind2maps emacs viins -- -s '^xz' help-zle
-#k# Insert files and test globbing
-bind2maps emacs viins -- -s "^xf" insert-files
-#k# Edit the current line in \kbd{\$EDITOR}
-bind2maps emacs viins -- -s '\ee' edit-command-line
-#k# search history backward for entry beginning with typed text
-bind2maps emacs viins -- -s '^xp' history-beginning-search-backward-end
-#k# search history forward for entry beginning with typed text
-bind2maps emacs viins -- -s '^xP' history-beginning-search-forward-end
-#k# search history backward for entry beginning with typed text
-bind2maps emacs viins -- PageUp history-beginning-search-backward-end
-#k# search history forward for entry beginning with typed text
-bind2maps emacs viins -- PageDown history-beginning-search-forward-end
-#k# Toggle abbreviation expansion on/off
-bind2maps emacs viins -- -s '^xA' grml_toggle_abbrev
-bind2maps emacs viins -- -s "^x^h" commit-to-history
-#k# Kill left-side word or everything up to next slash
-bind2maps emacs viins -- -s '\ev' slash-backward-kill-word
-#k# Kill left-side word or everything up to next slash
-bind2maps emacs viins -- -s '\e^h' slash-backward-kill-word
-#k# Kill left-side word or everything up to next slash
-bind2maps emacs viins -- -s '\e^?' slash-backward-kill-word
-# Do history expansion on space:
-bind2maps emacs viins -- -s ' ' magic-space
-#k# Trigger menu-complete
-bind2maps emacs viins -- -s '\ei' menu-complete # menu completion via esc-i
-#k# Insert a timestamp on the command line (yyyy-mm-dd)
-bind2maps emacs viins -- -s '^ed' insert-datestamp
-#k# Insert last typed word
-bind2maps emacs viins -- -s "\em" insert-last-typed-word
-#k# A smart shortcut for \kbd{fg<enter>}
-bind2maps emacs viins -- -s '^z' grml-zsh-fg
-#k# prepend the current command with "sudo"
-bind2maps emacs viins -- -s "^os" sudo-command-line
-#k# jump to after first word (for adding options)
-bind2maps emacs viins -- -s '^x1' jump_after_first_word
-#k# complete word from history with menu
-bind2maps emacs viins -- -s "^x^x" hist-complete
-
-# insert unicode character
-# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
-# See for example http://unicode.org/charts/ for unicode characters code
-#k# Insert Unicode character
-bind2maps emacs viins -- -s '^xi' insert-unicode-char
-
-# use the new *-pattern-* widgets for incremental history search
-if zrcgotwidget history-incremental-pattern-search-backward; then
- for seq wid in '^r' history-incremental-pattern-search-backward \
- '^s' history-incremental-pattern-search-forward
- do
- bind2maps emacs viins vicmd -- -s $seq $wid
- done
-fi
-
-if zrcgotkeymap menuselect; then
- #m# k Shift-tab Perform backwards menu completion
- bind2maps menuselect -- BackTab reverse-menu-complete
-
- #k# menu selection: pick item but stay in the menu
- bind2maps menuselect -- -s '\e^M' accept-and-menu-complete
- # also use + and INSERT since it's easier to press repeatedly
- bind2maps menuselect -- -s '+' accept-and-menu-complete
- bind2maps menuselect -- Insert accept-and-menu-complete
-
- # accept a completion and try to complete again by using menu
- # completion; very useful with completing directories
- # by using 'undo' one's got a simple file browser
- bind2maps menuselect -- -s '^o' accept-and-infer-next-history
-fi
-
-# Finally, here are still a few hardcoded escape sequences; Special sequences
-# like Ctrl-<Cursor-key> etc do suck a fair bit, because they are not
-# standardised and most of the time are not available in a terminals terminfo
-# entry.
-#
-# While we do not encourage adding bindings like these, we will keep these for
-# backward compatibility.
-
-## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on
-## the command line.
-# URxvt sequences:
-bind2maps emacs viins vicmd -- -s '\eOc' forward-word
-bind2maps emacs viins vicmd -- -s '\eOd' backward-word
-# These are for xterm:
-bind2maps emacs viins vicmd -- -s '\e[1;5C' forward-word
-bind2maps emacs viins vicmd -- -s '\e[1;5D' backward-word
-## the same for alt-left-arrow and alt-right-arrow
-# URxvt again:
-bind2maps emacs viins vicmd -- -s '\e\e[C' forward-word
-bind2maps emacs viins vicmd -- -s '\e\e[D' backward-word
-# Xterm again:
-bind2maps emacs viins vicmd -- -s '^[[1;3C' forward-word
-bind2maps emacs viins vicmd -- -s '^[[1;3D' backward-word
-# Also try ESC Left/Right:
-bind2maps emacs viins vicmd -- -s '\e'${key[Right]} forward-word
-bind2maps emacs viins vicmd -- -s '\e'${key[Left]} backward-word
-
-# autoloading
-
-zrcautoload zmv
-zrcautoload zed
-
-# we don't want to quote/espace URLs on our own...
-# if autoload -U url-quote-magic ; then
-# zle -N self-insert url-quote-magic
-# zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}='
-# else
-# print 'Notice: no url-quote-magic available :('
-# fi
-alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic'
-
-#m# k ESC-h Call \kbd{run-help} for the 1st word on the command line
-alias run-help >&/dev/null && unalias run-help
-for rh in run-help{,-git,-svk,-svn}; do
- zrcautoload $rh
-done; unset rh
-
-# command not found handling
-
-(( ${COMMAND_NOT_FOUND} == 1 )) &&
-function command_not_found_handler() {
- emulate -L zsh
- if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then
- ${GRML_ZSH_CNF_HANDLER} $1
- fi
- return 1
-}
-
-# history
-
-ZSHDIR=${ZDOTDIR:-${HOME}/.zsh}
-
-#v#
-HISTFILE=${ZDOTDIR:-${HOME}}/.zsh_history
-isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
-isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history
-
-# dirstack handling
-
-DIRSTACKSIZE=${DIRSTACKSIZE:-20}
-DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs}
-
-if [[ -f ${DIRSTACKFILE} ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
- dirstack=( ${(f)"$(< $DIRSTACKFILE)"} )
- # "cd -" won't work after login by just setting $OLDPWD, so
- [[ -d $dirstack[1] ]] && cd $dirstack[1] && cd $OLDPWD
-fi
-
-chpwd() {
- local -ax my_stack
- my_stack=( ${PWD} ${dirstack} )
- if is42 ; then
- builtin print -l ${(u)my_stack} >! ${DIRSTACKFILE}
- else
- uprint my_stack >! ${DIRSTACKFILE}
- fi
-}
-
-# directory based profiles
-
-if is433 ; then
-
-# chpwd_profiles(): Directory Profiles, Quickstart:
-#
-# In .zshrc.local:
-#
-# zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
-# zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
-# chpwd_profiles
-#
-# For details see the `grmlzshrc.5' manual page.
-function chpwd_profiles() {
- local profile context
- local -i reexecute
-
- context=":chpwd:profiles:$PWD"
- zstyle -s "$context" profile profile || profile='default'
- zstyle -T "$context" re-execute && reexecute=1 || reexecute=0
-
- if (( ${+parameters[CHPWD_PROFILE]} == 0 )); then
- typeset -g CHPWD_PROFILE
- local CHPWD_PROFILES_INIT=1
- (( ${+functions[chpwd_profiles_init]} )) && chpwd_profiles_init
- elif [[ $profile != $CHPWD_PROFILE ]]; then
- (( ${+functions[chpwd_leave_profile_$CHPWD_PROFILE]} )) \
- && chpwd_leave_profile_${CHPWD_PROFILE}
- fi
- if (( reexecute )) || [[ $profile != $CHPWD_PROFILE ]]; then
- (( ${+functions[chpwd_profile_$profile]} )) && chpwd_profile_${profile}
- fi
-
- CHPWD_PROFILE="${profile}"
- return 0
-}
-
-chpwd_functions=( ${chpwd_functions} chpwd_profiles )
-
-fi # is433
-
-# Prompt setup for grml:
-
-# set colors for use in prompts (modern zshs allow for the use of %F{red}foo%f
-# in prompts to get a red "foo" embedded, but it's good to keep these for
-# backwards compatibility).
-if zrcautoload colors && colors 2>/dev/null ; then
- BLUE="%{${fg[blue]}%}"
- RED="%{${fg_bold[red]}%}"
- GREEN="%{${fg[green]}%}"
- CYAN="%{${fg[cyan]}%}"
- MAGENTA="%{${fg[magenta]}%}"
- YELLOW="%{${fg[yellow]}%}"
- WHITE="%{${fg[white]}%}"
- NO_COLOR="%{${reset_color}%}"
-else
- BLUE=$'%{\e[1;34m%}'
- RED=$'%{\e[1;31m%}'
- GREEN=$'%{\e[1;32m%}'
- CYAN=$'%{\e[1;36m%}'
- WHITE=$'%{\e[1;37m%}'
- MAGENTA=$'%{\e[1;35m%}'
- YELLOW=$'%{\e[1;33m%}'
- NO_COLOR=$'%{\e[0m%}'
-fi
-
-# First, the easy ones: PS2..4:
-
-# secondary prompt, printed when the shell needs more information to complete a
-# command.
-PS2='\`%_> '
-# selection prompt used within a select loop.
-PS3='?# '
-# the execution trace prompt (setopt xtrace). default: '+%N:%i>'
-PS4='+%N:%i:%_> '
-
-# Some additional features to use with our prompt:
-#
-# - battery status
-# - debian_chroot
-# - vcs_info setup and version specific fixes
-
-# display battery status on right side of prompt via running 'BATTERY=1 zsh'
-if [[ $BATTERY -gt 0 ]] ; then
- if ! check_com -c acpi ; then
- BATTERY=0
- fi
-fi
-
-battery() {
-if [[ $BATTERY -gt 0 ]] ; then
- PERCENT="${${"$(acpi 2>/dev/null)"}/(#b)[[:space:]]#Battery <->: [^0-9]##, (<->)%*/${match[1]}}"
- if [[ -z "$PERCENT" ]] ; then
- PERCENT='acpi not present'
- else
- if [[ "$PERCENT" -lt 20 ]] ; then
- PERCENT="warning: ${PERCENT}%%"
- else
- PERCENT="${PERCENT}%%"
- fi
- fi
-fi
-}
-
-# set variable debian_chroot if running in a chroot with /etc/debian_chroot
-if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then
- debian_chroot=$(</etc/debian_chroot)
-fi
-
-# gather version control information for inclusion in a prompt
-
-if zrcautoload vcs_info; then
- # `vcs_info' in zsh versions 4.3.10 and below have a broken `_realpath'
- # function, which can cause a lot of trouble with our directory-based
- # profiles. So:
- if [[ ${ZSH_VERSION} == 4.3.<-10> ]] ; then
- function VCS_INFO_realpath () {
- setopt localoptions NO_shwordsplit chaselinks
- ( builtin cd -q $1 2> /dev/null && pwd; )
- }
- fi
-
- zstyle ':vcs_info:*' max-exports 2
-
- if [[ -o restricted ]]; then
- zstyle ':vcs_info:*' enable NONE
- fi
-fi
-
-# Change vcs_info formats for the grml prompt. The 2nd format sets up
-# $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title.
-# TODO: The included vcs_info() version still uses $VCS_INFO_message_N_.
-# That needs to be the use of $VCS_INFO_message_N_ needs to be changed
-# to $vcs_info_msg_N_ as soon as we use the included version.
-if [[ "$TERM" == dumb ]] ; then
- zstyle ':vcs_info:*' actionformats "(%s%)-[%b|%a] " "zsh: %r"
- zstyle ':vcs_info:*' formats "(%s%)-[%b] " "zsh: %r"
-else
- # these are the same, just with a lot of colors:
- zstyle ':vcs_info:*' actionformats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} " \
- "zsh: %r"
- zstyle ':vcs_info:*' formats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR}%} " \
- "zsh: %r"
- zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "%b${RED}:${YELLOW}%r"
-fi
-
-# Now for the fun part: The grml prompt themes in `promptsys' mode of operation
-
-# This actually defines three prompts:
-#
-# - grml
-# - grml-large
-# - grml-chroot
-#
-# They all share the same code and only differ with respect to which items they
-# contain. The main source of documentation is the `prompt_grml_help' function
-# below, which gets called when the user does this: prompt -h grml
-
-function prompt_grml_help () {
- cat <<__EOF0__
- prompt grml
-
- This is the prompt as used by the grml-live system <http://grml.org>. It is
- a rather simple one-line prompt, that by default looks something like this:
-
- <user>@<host> <current-working-directory>[ <vcs_info-data>]%
-
- The prompt itself integrates with zsh's prompt themes system (as you are
- witnessing right now) and is configurable to a certain degree. In
- particular, these aspects are customisable:
-
- - The items used in the prompt (e.g. you can remove \`user' from
- the list of activated items, which will cause the user name to
- be omitted from the prompt string).
-
- - The attributes used with the items are customisable via strings
- used before and after the actual item.
-
- The available items are: at, battery, change-root, date, grml-chroot,
- history, host, jobs, newline, path, percent, rc, rc-always, sad-smiley,
- shell-level, time, user, vcs
-
- The actual configuration is done via zsh's \`zstyle' mechanism. The
- context, that is used while looking up styles is:
-
- ':prompt:grml:<left-or-right>:<subcontext>'
-
- Here <left-or-right> is either \`left' or \`right', signifying whether the
- style should affect the left or the right prompt. <subcontext> is either
- \`setup' or 'items:<item>', where \`<item>' is one of the available items.
-
- The styles:
-
- - use-rprompt (boolean): If \`true' (the default), print a sad smiley
- in $RPROMPT if the last command a returned non-successful error code.
- (This in only valid if <left-or-right> is "right"; ignored otherwise)
-
- - items (list): The list of items used in the prompt. If \`vcs' is
- present in the list, the theme's code invokes \`vcs_info'
- accordingly. Default (left): rc change-root user at host path vcs
- percent; Default (right): sad-smiley
-
- Available styles in 'items:<item>' are: pre, post. These are strings that
- are inserted before (pre) and after (post) the item in question. Thus, the
- following would cause the user name to be printed in red instead of the
- default blue:
-
- zstyle ':prompt:grml:*:items:user' pre '%F{red}'
-
- Note, that the \`post' style may remain at its default value, because its
- default value is '%f', which turns the foreground text attribute off (which
- is exactly, what is still required with the new \`pre' value).
-__EOF0__
-}
-
-function prompt_grml-chroot_help () {
- cat <<__EOF0__
- prompt grml-chroot
-
- This is a variation of the grml prompt, see: prompt -h grml
-
- The main difference is the default value of the \`items' style. The rest
- behaves exactly the same. Here are the defaults for \`grml-chroot':
-
- - left: grml-chroot user at host path percent
- - right: (empty list)
-__EOF0__
-}
-
-function prompt_grml-large_help () {
- cat <<__EOF0__
- prompt grml-large
-
- This is a variation of the grml prompt, see: prompt -h grml
-
- The main difference is the default value of the \`items' style. In
- particular, this theme uses _two_ lines instead of one with the plain
- \`grml' theme. The rest behaves exactly the same. Here are the defaults
- for \`grml-large':
-
- - left: rc jobs history shell-level change-root time date newline user
- at host path vcs percent
- - right: sad-smiley
-__EOF0__
-}
-
-function grml_prompt_setup () {
- emulate -L zsh
- autoload -Uz vcs_info
- autoload -Uz add-zsh-hook
- add-zsh-hook precmd prompt_$1_precmd
-}
-
-function prompt_grml_setup () {
- grml_prompt_setup grml
-}
-
-function prompt_grml-chroot_setup () {
- grml_prompt_setup grml-chroot
-}
-
-function prompt_grml-large_setup () {
- grml_prompt_setup grml-large
-}
-
-# These maps define default tokens and pre-/post-decoration for items to be
-# used within the themes. All defaults may be customised in a context sensitive
-# matter by using zsh's `zstyle' mechanism.
-typeset -gA grml_prompt_pre_default \
- grml_prompt_post_default \
- grml_prompt_token_default \
- grml_prompt_token_function
-
-grml_prompt_pre_default=(
- at ''
- battery ' '
- change-root ''
- date '%F{blue}'
- grml-chroot '%F{red}'
- history '%F{green}'
- host ''
- jobs '%F{cyan}'
- newline ''
- path '%B'
- percent ''
- rc '%B%F{red}'
- rc-always ''
- sad-smiley ''
- shell-level '%F{red}'
- time '%F{blue}'
- user '%B%F{blue}'
- vcs ''
-)
-
-grml_prompt_post_default=(
- at ''
- battery ''
- change-root ''
- date '%f'
- grml-chroot '%f '
- history '%f'
- host ''
- jobs '%f'
- newline ''
- path '%b'
- percent ''
- rc '%f%b'
- rc-always ''
- sad-smiley ''
- shell-level '%f'
- time '%f'
- user '%f%b'
- vcs ''
-)
-
-grml_prompt_token_default=(
- at '@'
- battery 'PERCENT'
- change-root 'debian_chroot'
- date '%D{%Y-%m-%d}'
- grml-chroot 'GRML_CHROOT'
- history '{history#%!} '
- host '%m '
- jobs '[%j running job(s)] '
- newline $'\n'
- path '%40<..<%~%<< '
- percent '%# '
- rc '%(?..%? )'
- rc-always '%?'
- sad-smiley '%(?..:()'
- shell-level '%(3L.+ .)'
- time '%D{%H:%M:%S} '
- user '%n'
- vcs '0'
-)
-
-function GRML_theme_add_token_usage () {
- cat <<__EOF__
- Usage: grml_theme_add_token <name> [-f|-i] <token/function> [<pre> <post>]
-
- <name> is the name for the newly added token. If the \`-f' or \`-i' options
- are used, <token/function> is the name of the function (see below for
- details). Otherwise it is the literal token string to be used. <pre> and
- <post> are optional.
-
- Options:
-
- -f <function> Use a function named \`<function>' each time the token
- is to be expanded.
-
- -i <function> Use a function named \`<function>' to initialise the
- value of the token _once_ at runtime.
-
- The functions are called with one argument: the token's new name. The
- return value is expected in the \$REPLY parameter. The use of these
- options is mutually exclusive.
-
- Example:
-
- To add a new token \`day' that expands to the current weekday in the
- current locale in green foreground colour, use this:
-
- grml_theme_add_token day '%D{%A}' '%F{green}' '%f'
-
- Another example would be support for \$VIRTUAL_ENV:
-
- function virtual_env_prompt () {
- REPLY=\${VIRTUAL_ENV+\${VIRTUAL_ENV:t} }
- }
- grml_theme_add_token virtual-env -f virtual_env_prompt
-
- After that, you will be able to use a changed \`items' style to
- assemble your prompt.
-__EOF__
-}
-
-function grml_theme_add_token () {
- emulate -L zsh
- local name token pre post
- local -i init funcall
-
- if (( ARGC == 0 )); then
- GRML_theme_add_token_usage
- return 0
- fi
-
- init=0
- funcall=0
- pre=''
- post=''
- name=$1
- shift
- if [[ $1 == '-f' ]]; then
- funcall=1
- shift
- elif [[ $1 == '-i' ]]; then
- init=1
- shift
- fi
-
- if (( ARGC == 0 )); then
- printf '
-grml_theme_add_token: No token-string/function-name provided!\n\n'
- GRML_theme_add_token_usage
- return 1
- fi
- token=$1
- shift
- if (( ARGC != 0 && ARGC != 2 )); then
- printf '
-grml_theme_add_token: <pre> and <post> need to by specified _both_!\n\n'
- GRML_theme_add_token_usage
- return 1
- fi
- if (( ARGC )); then
- pre=$1
- post=$2
- shift 2
- fi
-
- if (( ${+grml_prompt_token_default[$name]} )); then
- printf '
-grml_theme_add_token: Token `%s'\'' exists! Giving up!\n\n' $name
- GRML_theme_add_token_usage
- return 2
- fi
- if (( init )); then
- $token $name
- token=$REPLY
- fi
- grml_prompt_pre_default[$name]=$pre
- grml_prompt_post_default[$name]=$post
- if (( funcall )); then
- grml_prompt_token_function[$name]=$token
- grml_prompt_token_default[$name]=23
- else
- grml_prompt_token_default[$name]=$token
- fi
-}
-
-function grml_typeset_and_wrap () {
- emulate -L zsh
- local target="$1"
- local new="$2"
- local left="$3"
- local right="$4"
-
- if (( ${+parameters[$new]} )); then
- typeset -g "${target}=${(P)target}${left}${(P)new}${right}"
- fi
-}
-
-function grml_prompt_addto () {
- emulate -L zsh
- local target="$1"
- local lr it apre apost new v
- local -a items
- shift
-
- [[ $target == PS1 ]] && lr=left || lr=right
- zstyle -a ":prompt:${grmltheme}:${lr}:setup" items items || items=( "$@" )
- typeset -g "${target}="
- for it in "${items[@]}"; do
- zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" pre apre \
- || apre=${grml_prompt_pre_default[$it]}
- zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" post apost \
- || apost=${grml_prompt_post_default[$it]}
- zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" token new \
- || new=${grml_prompt_token_default[$it]}
- typeset -g "${target}=${(P)target}${apre}"
- if (( ${+grml_prompt_token_function[$it]} )); then
- ${grml_prompt_token_function[$it]} $it
- typeset -g "${target}=${(P)target}${REPLY}"
- else
- case $it in
- battery)
- grml_typeset_and_wrap $target $new '' ''
- ;;
- change-root)
- grml_typeset_and_wrap $target $new '(' ')'
- ;;
- grml-chroot)
- if [[ -n ${(P)new} ]]; then
- typeset -g "${target}=${(P)target}(CHROOT)"
- fi
- ;;
- vcs)
- v="vcs_info_msg_${new}_"
- if (( ! vcscalled )); then
- vcs_info
- vcscalled=1
- fi
- if (( ${+parameters[$v]} )) && [[ -n "${(P)v}" ]]; then
- typeset -g "${target}=${(P)target}${(P)v}"
- fi
- ;;
- *) typeset -g "${target}=${(P)target}${new}" ;;
- esac
- fi
- typeset -g "${target}=${(P)target}${apost}"
- done
-}
-
-function prompt_grml_precmd () {
- emulate -L zsh
- local grmltheme=grml
- local -a left_items right_items
- left_items=(rc change-root user at host path vcs percent)
- right_items=(sad-smiley)
-
- prompt_grml_precmd_worker
-}
-
-function prompt_grml-chroot_precmd () {
- emulate -L zsh
- local grmltheme=grml-chroot
- local -a left_items right_items
- left_items=(grml-chroot user at host path percent)
- right_items=()
-
- prompt_grml_precmd_worker
-}
-
-function prompt_grml-large_precmd () {
- emulate -L zsh
- local grmltheme=grml-large
- local -a left_items right_items
- left_items=(rc jobs history shell-level change-root time date newline
- user at host path vcs percent)
- right_items=(sad-smiley)
-
- prompt_grml_precmd_worker
-}
-
-function prompt_grml_precmd_worker () {
- emulate -L zsh
- local -i vcscalled=0
-
- grml_prompt_addto PS1 "${left_items[@]}"
- if zstyle -T ":prompt:${grmltheme}:right:setup" use-rprompt; then
- grml_prompt_addto RPS1 "${right_items[@]}"
- fi
-}
-
-grml_prompt_fallback() {
- setopt prompt_subst
- precmd() {
- (( ${+functions[vcs_info]} )) && vcs_info
- }
-
- p0="${RED}%(?..%? )${WHITE}${debian_chroot:+($debian_chroot)}"
- p1="${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "'${vcs_info_msg_0_}'"%# "
- if (( EUID == 0 )); then
- PROMPT="${BLUE}${p0}${RED}${p1}"
- else
- PROMPT="${RED}${p0}${BLUE}${p1}"
- fi
- unset p0 p1
-}
-
-if zrcautoload promptinit && promptinit 2>/dev/null ; then
- # Since we define the required functions in here and not in files in
- # $fpath, we need to stick the theme's name into `$prompt_themes'
- # ourselves, since promptinit does not pick them up otherwise.
- prompt_themes+=( grml grml-chroot grml-large )
- # Also, keep the array sorted...
- prompt_themes=( "${(@on)prompt_themes}" )
-else
- print 'Notice: no promptinit available :('
- grml_prompt_fallback
-fi
-
-if is437; then
- # The prompt themes use modern features of zsh, that require at least
- # version 4.3.7 of the shell. Use the fallback otherwise.
- if [[ $BATTERY -gt 0 ]]; then
- zstyle ':prompt:grml:right:setup' items sad-smiley battery
- add-zsh-hook precmd battery
- fi
- if [[ "$TERM" == dumb ]] ; then
- zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" pre ''
- zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" post ' '
- for i in rc user path jobs history date time shell-level; do
- zstyle ":prompt:grml(|-large|-chroot):*:items:$i" pre ''
- zstyle ":prompt:grml(|-large|-chroot):*:items:$i" post ''
- done
- unset i
- zstyle ':prompt:grml(|-large|-chroot):right:setup' use-rprompt false
- elif (( EUID == 0 )); then
- zstyle ':prompt:grml(|-large|-chroot):*:items:user' pre '%B%F{red}'
- fi
-
- # Finally enable one of the prompts.
- if [[ -n $GRML_CHROOT ]]; then
- prompt grml-chroot
- elif [[ $GRMLPROMPT -gt 0 ]]; then
- prompt grml-large
- else
- prompt grml
- fi
-else
- grml_prompt_fallback
-fi
-
-# Terminal-title wizardry
-
-function ESC_print () {
- info_print $'\ek' $'\e\\' "$@"
-}
-function set_title () {
- info_print $'\e]0;' $'\a' "$@"
-}
-
-function info_print () {
- local esc_begin esc_end
- esc_begin="$1"
- esc_end="$2"
- shift 2
- printf '%s' ${esc_begin}
- printf '%s' "$*"
- printf '%s' "${esc_end}"
-}
-
-function grml_reset_screen_title () {
- # adjust title of xterm
- # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
- [[ ${NOTITLE:-} -gt 0 ]] && return 0
- case $TERM in
- (xterm*|rxvt*)
- set_title ${(%):-"%n@%m: %~"}
- ;;
- esac
-}
-
-function grml_vcs_to_screen_title () {
- if [[ $TERM == screen* ]] ; then
- if [[ -n ${vcs_info_msg_1_} ]] ; then
- ESC_print ${vcs_info_msg_1_}
- else
- ESC_print "zsh"
- fi
- fi
-}
-
-function grml_maintain_name () {
- # set hostname if not running on host with name 'grml'
- if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != $(hostname) ]] ; then
- NAME="@$HOSTNAME"
- fi
-}
-
-function grml_cmd_to_screen_title () {
- # get the name of the program currently running and hostname of local
- # machine set screen window title if running in a screen
- if [[ "$TERM" == screen* ]] ; then
- local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME"
- ESC_print ${CMD}
- fi
-}
-
-function grml_control_xterm_title () {
- case $TERM in
- (xterm*|rxvt*)
- set_title "${(%):-"%n@%m:"}" "$1"
- ;;
- esac
-}
-
-zrcautoload add-zsh-hook || add-zsh-hook () { :; }
-if [[ $NOPRECMD -eq 0 ]]; then
- add-zsh-hook precmd grml_reset_screen_title
- add-zsh-hook precmd grml_vcs_to_screen_title
- add-zsh-hook preexec grml_maintain_name
- add-zsh-hook preexec grml_cmd_to_screen_title
- if [[ $NOTITLE -eq 0 ]]; then
- add-zsh-hook preexec grml_control_xterm_title
- fi
-fi
-
-# 'hash' some often used directories
-#d# start
-hash -d deb=/var/cache/apt/archives
-hash -d doc=/usr/share/doc
-hash -d linux=/lib/modules/$(command uname -r)/build/
-hash -d log=/var/log
-hash -d slog=/var/log/syslog
-hash -d src=/usr/src
-hash -d templ=/usr/share/doc/grml-templates
-hash -d tt=/usr/share/doc/texttools-doc
-hash -d www=/var/www
-#d# end
-
-# some aliases
-if check_com -c screen ; then
- if [[ $UID -eq 0 ]] ; then
- if [[ -r /etc/grml/screenrc ]]; then
- alias screen="${commands[screen]} -c /etc/grml/screenrc"
- fi
- elif [[ -r $HOME/.screenrc ]] ; then
- alias screen="${commands[screen]} -c $HOME/.screenrc"
- else
- if [[ -r /etc/grml/screenrc_grml ]]; then
- alias screen="${commands[screen]} -c /etc/grml/screenrc_grml"
- else
- if [[ -r /etc/grml/screenrc ]]; then
- alias screen="${commands[screen]} -c /etc/grml/screenrc"
- fi
- fi
- fi
-fi
-
-# do we have GNU ls with color-support?
-if [[ "$TERM" != dumb ]]; then
- #a1# List files with colors (\kbd{ls -b -CF \ldots})
- alias ls='ls -b -CF '${ls_options:+"${ls_options[*]}"}
- #a1# List all files, with colors (\kbd{ls -la \ldots})
- alias la='ls -la '${ls_options:+"${ls_options[*]}"}
- #a1# List files with long colored list, without dotfiles (\kbd{ls -l \ldots})
- alias ll='ls -l '${ls_options:+"${ls_options[*]}"}
- #a1# List files with long colored list, human readable sizes (\kbd{ls -hAl \ldots})
- alias lh='ls -hAl '${ls_options:+"${ls_options[*]}"}
- #a1# List files with long colored list, append qualifier to filenames (\kbd{ls -lF \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
- alias l='ls -lF '${ls_options:+"${ls_options[*]}"}
-else
- alias ls='ls -b -CF'
- alias la='ls -la'
- alias ll='ls -l'
- alias lh='ls -hAl'
- alias l='ls -lF'
-fi
-
-alias mdstat='cat /proc/mdstat'
-alias ...='cd ../../'
-
-# generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec:
-if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then
- alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)""
-fi
-
-# see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
-alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'"
-alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'"
-
-# make sure it is not assigned yet
-[[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
-utf2iso() {
- if isutfenv ; then
- for ENV in $(env | command grep -i '.utf') ; do
- eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
- done
- fi
-}
-
-# make sure it is not assigned yet
-[[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
-iso2utf() {
- if ! isutfenv ; then
- for ENV in $(env | command grep -i '\.iso') ; do
- eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
- done
- fi
-}
-
-# especially for roadwarriors using GNU screen and ssh:
-if ! check_com asc &>/dev/null ; then
- asc() { autossh -t "$@" 'screen -RdU' }
- compdef asc=ssh
-fi
-
-#f1# Hints for the use of zsh on grml
-zsh-help() {
- print "$bg[white]$fg[black]
-zsh-help - hints for use of zsh on grml
-=======================================$reset_color"
-
- print '
-Main configuration of zsh happens in /etc/zsh/zshrc.
-That file is part of the package grml-etc-core, if you want to
-use them on a non-grml-system just get the tar.gz from
-http://deb.grml.org/ or (preferably) get it from the git repository:
-
- http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
-
-This version of grml'\''s zsh setup does not use skel/.zshrc anymore.
-The file is still there, but it is empty for backwards compatibility.
-
-For your own changes use these two files:
- $HOME/.zshrc.pre
- $HOME/.zshrc.local
-
-The former is sourced very early in our zshrc, the latter is sourced
-very lately.
-
-System wide configuration without touching configuration files of grml
-can take place in /etc/zsh/zshrc.local.
-
-For information regarding zsh start at http://grml.org/zsh/
-
-Take a look at grml'\''s zsh refcard:
-% xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
-
-Check out the main zsh refcard:
-% '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf
-
-And of course visit the zsh-lovers:
-% man zsh-lovers
-
-You can adjust some options through environment variables when
-invoking zsh without having to edit configuration files.
-Basically meant for bash users who are not used to the power of
-the zsh yet. :)
-
- "NOCOR=1 zsh" => deactivate automatic correction
- "NOMENU=1 zsh" => do not use auto menu completion
- (note: use ctrl-d for completion instead!)
- "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
- "NOTITLE=1 zsh" => disable setting the title of xterms without disabling
- preexec() and precmd() completely
- "BATTERY=1 zsh" => activate battery status (via acpi) on right side of prompt
- "COMMAND_NOT_FOUND=1 zsh"
- => Enable a handler if an external command was not found
- The command called in the handler can be altered by setting
- the GRML_ZSH_CNF_HANDLER variable, the default is:
- "/usr/share/command-not-found/command-not-found"
-
-A value greater than 0 is enables a feature; a value equal to zero
-disables it. If you like one or the other of these settings, you can
-add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s
-zshrc.'
-
- print "
-$bg[white]$fg[black]
-Please report wishes + bugs to the grml-team: http://grml.org/bugs/
-Enjoy your grml system with the zsh!$reset_color"
-}
-
-# debian stuff
-if [[ -r /etc/debian_version ]] ; then
- #a3# Execute \kbd{apt-cache search}
- alias acs='apt-cache search'
- #a3# Execute \kbd{apt-cache show}
- alias acsh='apt-cache show'
- #a3# Execute \kbd{apt-cache policy}
- alias acp='apt-cache policy'
- #a3# Execute \kbd{apt-get dist-upgrade}
- salias adg="apt-get dist-upgrade"
- #a3# Execute \kbd{apt-get install}
- salias agi="apt-get install"
- #a3# Execute \kbd{aptitude install}
- salias ati="aptitude install"
- #a3# Execute \kbd{apt-get upgrade}
- salias ag="apt-get upgrade"
- #a3# Execute \kbd{apt-get update}
- salias au="apt-get update"
- #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade}
- salias -a up="aptitude update ; aptitude safe-upgrade"
- #a3# Execute \kbd{dpkg-buildpackage}
- alias dbp='dpkg-buildpackage'
- #a3# Execute \kbd{grep-excuses}
- alias ge='grep-excuses'
-
- # get a root shell as normal user in live-cd mode:
- if isgrmlcd && [[ $UID -ne 0 ]] ; then
- alias su="sudo su"
- fi
-
- #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog}
- salias llog="$PAGER /var/log/syslog" # take a look at the syslog
- #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog}
- salias tlog="tail -f /var/log/syslog" # follow the syslog
-fi
-
-# sort installed Debian-packages by size
-if check_com -c dpkg-query ; then
- #a3# List installed Debian-packages sorted by size
- alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr"
-fi
-
-# if cdrecord is a symlink (to wodim) or isn't present at all warn:
-if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
- if check_com -c wodim; then
- cdrecord() {
- cat <<EOMESS
-cdrecord is not provided under its original name by Debian anymore.
-See #377109 in the BTS of Debian for more details.
-
-Please use the wodim binary instead
-EOMESS
- return 1
- }
- fi
-fi
-
-# Use hard limits, except for a smaller stack and no core dumps
-unlimit
-is425 && limit stack 8192
-isgrmlcd && limit core 0 # important for a live-cd-system
-limit -s
-
-# grmlstuff
-grmlstuff() {
-# people should use 'grml-x'!
- if check_com -c 915resolution; then
- 855resolution() {
- echo "Please use 915resolution as resolution modifying tool for Intel \
-graphic chipset."
- return -1
- }
- fi
-
- #a1# Output version of running grml
- alias grml-version='cat /etc/grml_version'
-
- if check_com -c grml-debootstrap ; then
- debian2hd() {
- echo "Installing debian to harddisk is possible by using grml-debootstrap."
- return 1
- }
- fi
-}
-
-# now run the functions
-isgrml && checkhome
-is4 && isgrml && grmlstuff
-is4 && grmlcomp
-
-# keephack
-is4 && xsource "/etc/zsh/keephack"
-
-# wonderful idea of using "e" glob qualifier by Peter Stephenson
-# You use it as follows:
-# $ NTREF=/reference/file
-# $ ls -l *(e:nt:)
-# This lists all the files in the current directory newer than the reference file.
-# You can also specify the reference file inline; note quotes:
-# $ ls -l *(e:'nt ~/.zshenv':)
-is4 && nt() {
- if [[ -n $1 ]] ; then
- local NTREF=${~1}
- fi
- [[ $REPLY -nt $NTREF ]]
-}
-
-# shell functions
-
-#f1# Reload an autoloadable function
-freload() { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
-compdef _functions freload
-
-#f1# List symlinks in detail (more detailed version of 'readlink -f' and 'whence -s')
-sll() {
- [[ -z "$1" ]] && printf 'Usage: %s <file(s)>\n' "$0" && return 1
- for file in "$@" ; do
- while [[ -h "$file" ]] ; do
- ls -l $file
- file=$(readlink "$file")
- done
- done
-}
-
-# TODO: Is it supported to use pager settings like this?
-# PAGER='less -Mr' - If so, the use of $PAGER here needs fixing
-# with respect to wordsplitting. (ie. ${=PAGER})
-if check_com -c $PAGER ; then
- #f3# View Debian's changelog of a given package
- dchange() {
- emulate -L zsh
- if [[ -r /usr/share/doc/$1/changelog.Debian.gz ]] ; then
- $PAGER /usr/share/doc/$1/changelog.Debian.gz
- elif [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
- $PAGER /usr/share/doc/$1/changelog.gz
- else
- if check_com -c aptitude ; then
- echo "No changelog for package $1 found, using aptitude to retrieve it."
- if isgrml ; then
- aptitude -t unstable changelog $1
- else
- aptitude changelog $1
- fi
- else
- echo "No changelog for package $1 found, sorry."
- return 1
- fi
- fi
- }
- _dchange() { _files -W /usr/share/doc -/ }
- compdef _dchange dchange
-
- #f3# View Debian's NEWS of a given package
- dnews() {
- emulate -L zsh
- if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then
- $PAGER /usr/share/doc/$1/NEWS.Debian.gz
- else
- if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then
- $PAGER /usr/share/doc/$1/NEWS.gz
- else
- echo "No NEWS file for package $1 found, sorry."
- return 1
- fi
- fi
- }
- _dnews() { _files -W /usr/share/doc -/ }
- compdef _dnews dnews
-
- #f3# View Debian's copyright of a given package
- dcopyright() {
- emulate -L zsh
- if [[ -r /usr/share/doc/$1/copyright ]] ; then
- $PAGER /usr/share/doc/$1/copyright
- else
- echo "No copyright file for package $1 found, sorry."
- return 1
- fi
- }
- _dcopyright() { _files -W /usr/share/doc -/ }
- compdef _dcopyright dcopyright
-
- #f3# View upstream's changelog of a given package
- uchange() {
- emulate -L zsh
- if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
- $PAGER /usr/share/doc/$1/changelog.gz
- else
- echo "No changelog for package $1 found, sorry."
- return 1
- fi
- }
- _uchange() { _files -W /usr/share/doc -/ }
- compdef _uchange uchange
-fi
-
-# zsh profiling
-profile() {
- ZSH_PROFILE_RC=1 $SHELL "$@"
-}
-
-#f1# Edit an alias via zle
-edalias() {
- [[ -z "$1" ]] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ;
-}
-compdef _aliases edalias
-
-#f1# Edit a function via zle
-edfunc() {
- [[ -z "$1" ]] && { echo "Usage: edfunc <function_to_edit>" ; return 1 } || zed -f "$1" ;
-}
-compdef _functions edfunc
-
-# use it e.g. via 'Restart apache2'
-#m# f6 Start() \kbd{/etc/init.d/\em{process}}\quad\kbd{start}
-#m# f6 Restart() \kbd{/etc/init.d/\em{process}}\quad\kbd{restart}
-#m# f6 Stop() \kbd{/etc/init.d/\em{process}}\quad\kbd{stop}
-#m# f6 Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{reload}
-#m# f6 Force-Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{force-reload}
-#m# f6 Status() \kbd{/etc/init.d/\em{process}}\quad\kbd{status}
-if [[ -d /etc/init.d || -d /etc/service ]] ; then
- __start_stop() {
- local action_="${1:l}" # e.g Start/Stop/Restart
- local service_="$2"
- local param_="$3"
-
- local service_target_="$(readlink /etc/init.d/$service_)"
- if [[ $service_target_ == "/usr/bin/sv" ]]; then
- # runit
- case "${action_}" in
- start) if [[ ! -e /etc/service/$service_ ]]; then
- $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
- else
- $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
- fi ;;
- # there is no reload in runits sysv emulation
- reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
- *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
- esac
- else
- # sysvinit
- $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
- fi
- }
-
- _grmlinitd() {
- local -a scripts
- scripts=( /etc/init.d/*(x:t) )
- _describe "service startup script" scripts
- }
-
- for i in Start Restart Stop Force-Reload Reload Status ; do
- eval "$i() { __start_stop $i \"\$1\" \"\$2\" ; }"
- compdef _grmlinitd $i
- done
-fi
-
-#f1# Provides useful information on globbing
-H-Glob() {
- echo -e "
- / directories
- . plain files
- @ symbolic links
- = sockets
- p named pipes (FIFOs)
- * executable plain files (0100)
- % device files (character or block special)
- %b block special files
- %c character special files
- r owner-readable files (0400)
- w owner-writable files (0200)
- x owner-executable files (0100)
- A group-readable files (0040)
- I group-writable files (0020)
- E group-executable files (0010)
- R world-readable files (0004)
- W world-writable files (0002)
- X world-executable files (0001)
- s setuid files (04000)
- S setgid files (02000)
- t files with the sticky bit (01000)
-
- print *(m-1) # Files modified up to a day ago
- print *(a1) # Files accessed a day ago
- print *(@) # Just symlinks
- print *(Lk+50) # Files bigger than 50 kilobytes
- print *(Lk-50) # Files smaller than 50 kilobytes
- print **/*.c # All *.c files recursively starting in \$PWD
- print **/*.c~file.c # Same as above, but excluding 'file.c'
- print (foo|bar).* # Files starting with 'foo' or 'bar'
- print *~*.* # All Files that do not contain a dot
- chmod 644 *(.^x) # make all plain non-executable files publically readable
- print -l *(.c|.h) # Lists *.c and *.h
- print **/*(g:users:) # Recursively match all files that are owned by group 'users'
- echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
-}
-alias help-zshglob=H-Glob
-
-# grep for running process, like: 'any vim'
-any() {
- emulate -L zsh
- unsetopt KSH_ARRAYS
- if [[ -z "$1" ]] ; then
- echo "any - grep for process(es) by keyword" >&2
- echo "Usage: any <keyword>" >&2 ; return 1
- else
- ps xauwww | grep -i "${grep_options[@]}" "[${1[1]}]${1[2,-1]}"
- fi
-}
-
-
-# After resuming from suspend, system is paging heavily, leading to very bad interactivity.
-# taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
-[[ -r /proc/1/maps ]] && \
-deswap() {
- print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
- cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null
- print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
-}
-
-# a wrapper for vim, that deals with title setting
-# VIM_OPTIONS
-# set this array to a set of options to vim you always want
-# to have set when calling vim (in .zshrc.local), like:
-# VIM_OPTIONS=( -p )
-# This will cause vim to send every file given on the
-# commandline to be send to it's own tab (needs vim7).
-if check_com vim; then
- vim() {
- VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@"
- }
-fi
-
-# make a backup of a file
-bk() {
- cp -a "$1" "${1}_$(date --iso-8601=seconds)"
-}
-
-ssl_hashes=( sha512 sha256 sha1 md5 )
-
-for sh in ${ssl_hashes}; do
- eval 'ssl-cert-'${sh}'() {
- emulate -L zsh
- if [[ -z $1 ]] ; then
- printf '\''usage: %s <file>\n'\'' "ssh-cert-'${sh}'"
- return 1
- fi
- openssl x509 -noout -fingerprint -'${sh}' -in $1
- }'
-done; unset sh
-
-ssl-cert-fingerprints() {
- emulate -L zsh
- local i
- if [[ -z $1 ]] ; then
- printf 'usage: ssl-cert-fingerprints <file>\n'
- return 1
- fi
- for i in ${ssl_hashes}
- do ssl-cert-$i $1;
- done
-}
-
-ssl-cert-info() {
- emulate -L zsh
- if [[ -z $1 ]] ; then
- printf 'usage: ssl-cert-info <file>\n'
- return 1
- fi
- openssl x509 -noout -text -in $1
- ssl-cert-fingerprints $1
-}
-
-# make sure our environment is clean regarding colors
-for color in BLUE RED GREEN CYAN YELLOW MAGENTA WHITE ; unset $color
-
-# "persistent history"
-# just write important commands you always need to ~/.important_commands
-if [[ -r ~/.important_commands ]] ; then
- fc -R ~/.important_commands
-fi
-
-# load the lookup subsystem if it's available on the system
-zrcautoload lookupinit && lookupinit
-
-# variables
-
-# set terminal property (used e.g. by msgid-chooser)
-export COLORTERM="yes"
-
-# aliases
-
-# general
-#a2# Execute \kbd{du -sch}
-alias da='du -sch'
-#a2# Execute \kbd{jobs -l}
-alias j='jobs -l'
-
-# listing stuff
-#a2# Execute \kbd{ls -lSrah}
-alias dir="ls -lSrah"
-#a2# Only show dot-directories
-alias lad='ls -d .*(/)'
-#a2# Only show dot-files
-alias lsa='ls -a .*(.)'
-#a2# Only files with setgid/setuid/sticky flag
-alias lss='ls -l *(s,S,t)'
-#a2# Only show symlinks
-alias lsl='ls -l *(@)'
-#a2# Display only executables
-alias lsx='ls -l *(*)'
-#a2# Display world-{readable,writable,executable} files
-alias lsw='ls -ld *(R,W,X.^ND/)'
-#a2# Display the ten biggest files
-alias lsbig="ls -flh *(.OL[1,10])"
-#a2# Only show directories
-alias lsd='ls -d *(/)'
-#a2# Only show empty directories
-alias lse='ls -d *(/^F)'
-#a2# Display the ten newest files
-alias lsnew="ls -rtlh *(D.om[1,10])"
-#a2# Display the ten oldest files
-alias lsold="ls -rtlh *(D.Om[1,10])"
-#a2# Display the ten smallest files
-alias lssmall="ls -Srl *(.oL[1,10])"
-#a2# Display the ten newest directories and ten newest .directories
-alias lsnewdir="ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
-#a2# Display the ten oldest directories and ten oldest .directories
-alias lsolddir="ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
-
-# some useful aliases
-#a2# Remove current empty directory. Execute \kbd{cd ..; rmdir \$OLDCWD}
-alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD'
-
-#a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
-alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
-#a2# scp with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
-alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
-
-# work around non utf8 capable software in utf environment via $LANG and luit
-if check_com isutfenv && check_com luit ; then
- if check_com -c mrxvt ; then
- isutfenv && [[ -n "$LANG" ]] && \
- alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
- fi
-
- if check_com -c aterm ; then
- isutfenv && [[ -n "$LANG" ]] && \
- alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
- fi
-
- if check_com -c centericq ; then
- isutfenv && [[ -n "$LANG" ]] && \
- alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
- fi
-fi
-
-# useful functions
-
-#f5# Backup \kbd{file {\rm to} file\_timestamp}
-bk() {
- emulate -L zsh
- cp -b $1 $1_`date --iso-8601=m`
-}
-
-#f5# cd to directoy and list files
-cl() {
- emulate -L zsh
- cd $1 && ls -a
-}
-
-# smart cd function, allows switching to /etc when running 'cd /etc/fstab'
-cd() {
- if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then
- [[ ! -e ${1:h} ]] && return 1
- print "Correcting ${1} to ${1:h}"
- builtin cd ${1:h}
- else
- builtin cd "$@"
- fi
-}
-
-#f5# Create Directoy and \kbd{cd} to it
-mkcd() {
- if (( ARGC != 1 )); then
- printf 'usage: mkcd <new-directory>\n'
- return 1;
- fi
- if [[ ! -d "$1" ]]; then
- command mkdir -p "$1"
- else
- printf '`%s'\'' already exists: cd-ing.\n' "$1"
- fi
- builtin cd "$1"
-}
-
-#f5# Create temporary directory and \kbd{cd} to it
-cdt() {
- local t
- t=$(mktemp -d)
- echo "$t"
- builtin cd "$t"
-}
-
-#f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
-accessed() {
- emulate -L zsh
- print -l -- *(a-${1:-1})
-}
-
-#f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1
-changed() {
- emulate -L zsh
- print -l -- *(c-${1:-1})
-}
-
-#f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1
-modified() {
- emulate -L zsh
- print -l -- *(m-${1:-1})
-}
-# modified() was named new() in earlier versions, add an alias for backwards compatibility
-check_com new || alias new=modified
-
-# use colors when GNU grep with color-support
-#a2# Execute \kbd{grep -{}-color=auto}
-(( $#grep_options > 0 )) && alias grep='grep '${grep_options:+"${grep_options[*]}"}
-
-# Translate DE<=>EN
-# 'translate' looks up fot a word in a file with language-to-language
-# translations (field separator should be " : "). A typical wordlist looks
-# like at follows:
-# | english-word : german-transmission
-# It's also only possible to translate english to german but not reciprocal.
-# Use the following oneliner to turn back the sort order:
-# $ awk -F ':' '{ print $2" : "$1" "$3 }' \
-# /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
-#f5# Translates a word
-trans() {
- emulate -L zsh
- case "$1" in
- -[dD]*)
- translate -l de-en $2
- ;;
- -[eE]*)
- translate -l en-de $2
- ;;
- *)
- echo "Usage: $0 { -D | -E }"
- echo " -D == German to English"
- echo " -E == English to German"
- esac
-}
-
-# Usage: simple-extract <file>
-# Using option -d deletes the original archive file.
-#f5# Smart archive extractor
-simple-extract() {
- emulate -L zsh
- setopt extended_glob noclobber
- local DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
- local RC=0
- zparseopts -D -E "d=DELETE_ORIGINAL"
- for ARCHIVE in "${@}"; do
- case $ARCHIVE in
- *(tar.bz2|tbz2|tbz))
- DECOMP_CMD="tar -xvjf -"
- USES_STDIN=true
- USES_STDOUT=false
- ;;
- *(tar.gz|tgz))
- DECOMP_CMD="tar -xvzf -"
- USES_STDIN=true
- USES_STDOUT=false
- ;;
- *(tar.xz|txz|tar.lzma))
- DECOMP_CMD="tar -xvJf -"
- USES_STDIN=true
- USES_STDOUT=false
- ;;
- *tar)
- DECOMP_CMD="tar -xvf -"
- USES_STDIN=true
- USES_STDOUT=false
- ;;
- *rar)
- DECOMP_CMD="unrar x"
- USES_STDIN=false
- USES_STDOUT=false
- ;;
- *lzh)
- DECOMP_CMD="lha x"
- USES_STDIN=false
- USES_STDOUT=false
- ;;
- *7z)
- DECOMP_CMD="7z x"
- USES_STDIN=false
- USES_STDOUT=false
- ;;
- *(zip|jar))
- DECOMP_CMD="unzip"
- USES_STDIN=false
- USES_STDOUT=false
- ;;
- *deb)
- DECOMP_CMD="ar -x"
- USES_STDIN=false
- USES_STDOUT=false
- ;;
- *bz2)
- DECOMP_CMD="bzip2 -d -c -"
- USES_STDIN=true
- USES_STDOUT=true
- ;;
- *(gz|Z))
- DECOMP_CMD="gzip -d -c -"
- USES_STDIN=true
- USES_STDOUT=true
- ;;
- *(xz|lzma))
- DECOMP_CMD="xz -d -c -"
- USES_STDIN=true
- USES_STDOUT=true
- ;;
- *)
- print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2
- RC=$((RC+1))
- continue
- ;;
- esac
-
- if ! check_com ${DECOMP_CMD[(w)1]}; then
- echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2
- RC=$((RC+2))
- continue
- fi
-
- GZTARGET="${ARCHIVE:t:r}"
- if [[ -f $ARCHIVE ]] ; then
-
- print "Extracting '$ARCHIVE' ..."
- if $USES_STDIN; then
- if $USES_STDOUT; then
- ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET
- else
- ${=DECOMP_CMD} < "$ARCHIVE"
- fi
- else
- if $USES_STDOUT; then
- ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET
- else
- ${=DECOMP_CMD} "$ARCHIVE"
- fi
- fi
- [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE"
-
- elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
- if check_com curl; then
- WGET_CMD="curl -L -k -s -o -"
- elif check_com wget; then
- WGET_CMD="wget -q -O - --no-check-certificate"
- else
- print "ERROR: neither wget nor curl is installed" >&2
- RC=$((RC+4))
- continue
- fi
- print "Downloading and Extracting '$ARCHIVE' ..."
- if $USES_STDIN; then
- if $USES_STDOUT; then
- ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET
- RC=$((RC+$?))
- else
- ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD}
- RC=$((RC+$?))
- fi
- else
- if $USES_STDOUT; then
- ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET
- else
- ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE")
- fi
- fi
-
- else
- print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2
- RC=$((RC+8))
- fi
- done
- return $RC
-}
-
-__archive_or_uri()
-{
- _alternative \
- 'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \
- '_urls:Remote Archives:_urls'
-}
-
-_simple_extract()
-{
- _arguments \
- '-d[delete original archivefile after extraction]' \
- '*:Archive Or Uri:__archive_or_uri'
-}
-compdef _simple_extract simple-extract
-alias se=simple-extract
-
-#f5# Set all ulimit parameters to \kbd{unlimited}
-allulimit() {
- ulimit -c unlimited
- ulimit -d unlimited
- ulimit -f unlimited
- ulimit -l unlimited
- ulimit -n unlimited
- ulimit -s unlimited
- ulimit -t unlimited
-}
-
-#f5# Change the xterm title from within GNU-screen
-xtrename() {
- emulate -L zsh
- if [[ $1 != "-f" ]] ; then
- if [[ -z ${DISPLAY} ]] ; then
- printf 'xtrename only makes sense in X11.\n'
- return 1
- fi
- else
- shift
- fi
- if [[ -z $1 ]] ; then
- printf 'usage: xtrename [-f] "title for xterm"\n'
- printf ' renames the title of xterm from _within_ screen.\n'
- printf ' also works without screen.\n'
- printf ' will not work if DISPLAY is unset, use -f to override.\n'
- return 0
- fi
- print -n "\eP\e]0;${1}\C-G\e\\"
- return 0
-}
-
-# Create small urls via http://goo.gl using curl(1).
-# API reference: https://code.google.com/apis/urlshortener/
-function zurl() {
- emulate -L zsh
- setopt extended_glob
-
- if [[ -z $1 ]]; then
- print "USAGE: zurl <URL>"
- return 1
- fi
-
- local PN url prog api json contenttype item
- local -a data
- PN=$0
- url=$1
-
- # Prepend 'http://' to given URL where necessary for later output.
- if [[ ${url} != http(s|)://* ]]; then
- url='http://'${url}
- fi
-
- if check_com -c curl; then
- prog=curl
- else
- print "curl is not available, but mandatory for ${PN}. Aborting."
- return 1
- fi
- api='https://www.googleapis.com/urlshortener/v1/url'
- contenttype="Content-Type: application/json"
- json="{\"longUrl\": \"${url}\"}"
- data=(${(f)"$($prog --silent -H ${contenttype} -d ${json} $api)"})
- # Parse the response
- for item in "${data[@]}"; do
- case "$item" in
- ' '#'"id":'*)
- item=${item#*: \"}
- item=${item%\",*}
- printf '%s\n' "$item"
- return 0
- ;;
- esac
- done
- return 1
-}
-
-#f2# Find history events by search pattern and list them by date.
-whatwhen() {
- emulate -L zsh
- local usage help ident format_l format_s first_char remain first last
- usage='USAGE: whatwhen [options] <searchstring> <search range>'
- help='Use `whatwhen -h'\'' for further explanations.'
- ident=${(l,${#${:-Usage: }},, ,)}
- format_l="${ident}%s\t\t\t%s\n"
- format_s="${format_l//(\\t)##/\\t}"
- # Make the first char of the word to search for case
- # insensitive; e.g. [aA]
- first_char=[${(L)1[1]}${(U)1[1]}]
- remain=${1[2,-1]}
- # Default search range is `-100'.
- first=${2:-\-100}
- # Optional, just used for `<first> <last>' given.
- last=$3
- case $1 in
- ("")
- printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
- printf '%s\n%s\n\n' ${usage} ${help} && return 1
- ;;
- (-h)
- printf '%s\n\n' ${usage}
- print 'OPTIONS:'
- printf $format_l '-h' 'show help text'
- print '\f'
- print 'SEARCH RANGE:'
- printf $format_l "'0'" 'the whole history,'
- printf $format_l '-<n>' 'offset to the current history number; (default: -100)'
- printf $format_s '<[-]first> [<last>]' 'just searching within a give range'
- printf '\n%s\n' 'EXAMPLES:'
- printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
- printf $format_l 'whatwhen zsh -250'
- printf $format_l 'whatwhen foo 1 99'
- ;;
- (\?)
- printf '%s\n%s\n\n' ${usage} ${help} && return 1
- ;;
- (*)
- # -l list results on stout rather than invoking $EDITOR.
- # -i Print dates as in YYYY-MM-DD.
- # -m Search for a - quoted - pattern within the history.
- fc -li -m "*${first_char}${remain}*" $first $last
- ;;
- esac
-}
-
-# mercurial related stuff
-if check_com -c hg ; then
- # gnu like diff for mercurial
- # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
- #f5# GNU like diff for mercurial
- hgdi() {
- emulate -L zsh
- for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
- }
-
- # build debian package
- #a2# Alias for \kbd{hg-buildpackage}
- alias hbp='hg-buildpackage'
-
- # execute commands on the versioned patch-queue from the current repos
- alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
-
- # diffstat for specific version of a mercurial repository
- # hgstat => display diffstat between last revision and tip
- # hgstat 1234 => display diffstat between revision 1234 and tip
- #f5# Diffstat for specific version of a mercurial repos
- hgstat() {
- emulate -L zsh
- [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
- }
-
-fi # end of check whether we have the 'hg'-executable
-
-# grml-small cleanups
-
-# The following is used to remove zsh-config-items that do not work
-# in grml-small by default.
-# If you do not want these adjustments (for whatever reason), set
-# $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
-# sources if it is there).
-
-if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
-
- unset abk[V]
- unalias 'V' &> /dev/null
- unfunction vman &> /dev/null
- unfunction viless &> /dev/null
- unfunction 2html &> /dev/null
-
- # manpages are not in grmlsmall
- unfunction manzsh &> /dev/null
- unfunction man2 &> /dev/null
-
-fi
-
-zrclocal
-
-## genrefcard.pl settings
-
-### doc strings for external functions from files
-#m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
-
-### example: split functions-search 8,16,24,32
-#@# split functions-search 8
-
-## END OF FILE #################################################################
-# vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4
-# Local variables:
-# mode: sh
-# End:
v.licheni.net / stack / conf / zsh.git / commitdiff